The gap between what you specified and what gets built — between what the code requires and what gets drawn — between what the SOP demands and what gets made. We close it, automatically, before the field finds it for you.
The full compliance loop — constraint ingestion, model scanning, deviation findings, and auto-remediation — running against a real structural + MEP coordination model. All five stages run inside the terminal below.
One agent, every documented constraint — specs, codes, SOPs, standards, and coordination requirements. Violations are flagged with source citations and severity scoring. Where the fix is deterministic, it writes directly to the source file. The Clash Detection Agent extends this to hard and soft clash analysis across structural, MEP, and architectural systems — equally mature, equally deployed.
Upload specs, codes, SOPs, or connect your document management system. The agent indexes every rule.
Point it at your BIM model, drawings, submittals, shop files, or fabrication outputs. Any format, any phase.
Real-time flagging of every violation with source citations, severity scoring, and suggested remediation paths.
For deterministic violations, the agent generates the fix — showing before and after — and writes accepted changes directly to the source file. No separate rework queue.
Hard and soft clash detection across structural, MEP, and architectural systems in coordination models. Severity scoring, clearance analysis, element identification, and auto-remediation reroutes — all before the field finds it.
Point at your Revit, IFC, or Navisworks coordination model. All disciplines, all systems, one pass.
Structural vs MEP, architectural vs MEP, ductwork vs sprinkler — every combination, simultaneously.
Each clash identified by element ID, location, severity (hard/soft), and affected systems. Full traceability.
For deterministic clashes, the agent generates a reroute path. Accept it, or flag for engineer review with full context.
CSI divisions, product specs, material requirements, performance criteria.
IBC, ASCE 7, ACI 318, energy codes, local jurisdiction requirements.
Shop standards, fabrication tolerances, process sequences, quality gates.
Approved change orders checked against as-modeled conditions, with full deviation logging.
Draw conditions, substantial completion criteria, owner-defined acceptance standards.
Closeout checklists, O&M requirements, as-built standards, digital twin readiness.
We don't sell consulting. We deploy intelligence into your existing stack, then provide the strategic, technical, and organizational work that makes it stick.
Connect the agent to your existing stack — ACC, SharePoint, ERP, PLM, Procore.
Map your compliance exposure and priority order before committing to a deployment path.
Train the agent on your proprietary standards, SOPs, and internal constraint libraries.
Onboard your teams and define the policies that ensure the work survives long after we leave.
4–6 week engagements to demonstrate ROI in one workflow before committing to enterprise rollout.
BIM automation, document intelligence, predictive scheduling, and procurement matching.
Compliance agent enforcing shop standards across all fabrication outputs. Digital thread running from design intent through to as-built records for the first time.
Facility onboarding automated from weeks to hours. BIM standards compliance enforced at pipeline ingestion. Metadata governance deployed across all 300+ buildings.
Specs, codes, SOPs, standards — enforced automatically.
Hard + soft clash detection across structural, MEP, and architectural systems with auto-remediation.
Keep every model aligned with company standards.
Monitor building health with live data and predictive insights.
Traceability from design through fabrication and delivery.
Extract precise quantities and costs from your model.
Review submittals against specs in seconds.
View all agents →
Your specs, codes, SOPs, and standards — automatically enforced across every output, every phase, every domain. Violations are flagged with source citations and severity scoring. Where possible, the agent generates a fix and writes it directly to the source file. Accept all, or review individually.
Every AECM project is governed by hundreds of documented constraints — specs, codes, SOPs, standards. Today, compliance checking is done by senior engineers scanning drawings against printed code books. It fails predictably.
A rebar spacing callout at Grid B-4 contradicts IBC §1907.3. Nobody catches it until the inspector flags it after concrete placement.
A corridor wall assembly doesn't meet the 2-hour fire rating required by code. The architect specified the right assembly, but the model shows a different one.
An embed plate at Column C-7 is placed ±3/8" from spec when the SOP requires ±1/8". Discovered during erection — field correction required.
The Compliance Agent ingests any documented constraint — from CSI spec divisions to manufacturer SOPs — and enforces it against your work product automatically.
| Constraint Type | Examples | Integrates With | Autofix |
|---|---|---|---|
| Project Specifications | CSI divisions, product specs, material requirements, performance criteria | Procore, ACC, SharePoint | ✓ Deterministic |
| Building Codes | IBC, ASCE 7, ACI 318, energy codes, local jurisdiction requirements | Code databases, Revit | ✓ Deterministic |
| Manufacturing SOPs | Shop standards, fabrication tolerances, process sequences, quality gates | MES, parametric BIM, ERP | ⚠ Review required |
| Change Control | Approved change orders checked against as-modeled conditions | ACC, Procore, PLM | ✓ Deterministic |
| Lender / Owner Requirements | Draw conditions, substantial completion criteria, acceptance standards | Document management | ⚠ Review required |
| Handover Criteria | Closeout checklists, O&M requirements, as-built standards, digital twin readiness | Tandem, Crystal, BIM 360 | ✓ Deterministic |
Upload specs, codes, SOPs, or connect your document management system. The agent indexes every rule, clause, and requirement into a structured constraint library.
Point the agent at your BIM model, drawings, submittals, shop files, or fabrication outputs. Any format, any phase, any discipline.
Real-time flagging of every violation with source citations, severity scoring, element identification, and suggested remediation paths.
For deterministic violations, the agent generates the fix — showing before and after — and writes accepted changes directly to the source file.
The agent watches for new changes and re-validates continuously. Every model update is checked against the full constraint library automatically.
Three engagement models — from standalone SaaS to fully embedded custom deployments. Most clients start with a Proof-of-Concept sprint and scale from there.
Upload constraints and work products directly. The agent runs in the cloud and returns findings. No integration required.
Agent connects to your existing stack — ACC, Procore, SharePoint, ERP. Runs as part of your workflow, not alongside it.
Custom constraint libraries, proprietary SOP training, multi-project governance, and organizational change management.
Finds hard and soft clashes between structural, MEP, and architectural systems before they reach the field. Severity scoring, element identification, clearance analysis, and autofix reroute proposals — running on Revit, IFC, and Navisworks coordination models.
Physical overlaps — a duct running through a beam, a pipe intersecting a column. Zero tolerance. Must be resolved before construction.
Clearance violations — insufficient space for maintenance access, insulation envelopes, or code-required clearances around equipment.
One agent, every documented constraint — specs, codes, SOPs, standards, and coordination requirements. Violations are flagged with source citations and severity scoring. Where the fix is deterministic, it writes directly to the source file. The Clash Detection Agent extends this to hard and soft clash analysis across structural, MEP, and architectural systems — equally mature, equally deployed.
Upload specs, codes, SOPs, or connect your document management system. The agent indexes every rule.
Point it at your BIM model, drawings, submittals, shop files, or fabrication outputs. Any format, any phase.
Real-time flagging of every violation with source citations, severity scoring, and suggested remediation paths.
For deterministic violations, the agent generates the fix — showing before and after — and writes accepted changes directly to the source file. No separate rework queue.
Hard and soft clash detection across structural, MEP, and architectural systems in coordination models. Severity scoring, clearance analysis, element identification, and auto-remediation reroutes — all before the field finds it.
Point at your Revit, IFC, or Navisworks coordination model. All disciplines, all systems, one pass.
Structural vs MEP, architectural vs MEP, ductwork vs sprinkler — every combination, simultaneously.
Each clash identified by element ID, location, severity (hard/soft), and affected systems. Full traceability.
For deterministic clashes, the agent generates a reroute path. Accept it, or flag for engineer review with full context.
CSI divisions, product specs, material requirements, performance criteria.
IBC, ASCE 7, ACI 318, energy codes, local jurisdiction requirements.
Shop standards, fabrication tolerances, process sequences, quality gates.
Approved change orders checked against as-modeled conditions, with full deviation logging.
Draw conditions, substantial completion criteria, owner-defined acceptance standards.
Closeout checklists, O&M requirements, as-built standards, digital twin readiness.
We don't sell consulting. We deploy intelligence into your existing stack, then provide the strategic, technical, and organizational work that makes it stick.
Connect the agent to your existing stack — ACC, SharePoint, ERP, PLM, Procore.
Map your compliance exposure and priority order before committing to a deployment path.
Train the agent on your proprietary standards, SOPs, and internal constraint libraries.
Onboard your teams and define the policies that ensure the work survives long after we leave.
4–6 week engagements to demonstrate ROI in one workflow before committing to enterprise rollout.
BIM automation, document intelligence, predictive scheduling, and procurement matching.
Compliance agent enforcing shop standards across all fabrication outputs. Digital thread running from design intent through to as-built records for the first time.
Facility onboarding automated from weeks to hours. BIM standards compliance enforced at pipeline ingestion. Metadata governance deployed across all 300+ buildings.
Specs, codes, SOPs, standards — enforced automatically.
Hard + soft clash detection across structural, MEP, and architectural systems with auto-remediation.
Keep every model aligned with company standards.
Monitor building health with live data and predictive insights.
Traceability from design through fabrication and delivery.
Extract precise quantities and costs from your model.
Review submittals against specs in seconds.
View all agents →
The Compliance Agent page content is coming from the original matechi-v4 layout.
The full agent catalog page is not yet migrated; this is a placeholder to enable navigation.
Services page placeholder (from matechi-v4).
Work page placeholder (from matechi-v4).
About page placeholder (from matechi-v4).
Blog / field notes placeholder (from matechi-v4).
Contact page placeholder (from matechi-v4).